This is the housing i made for the solder station HotPens from the german Make 6/2021.
There are two versions, one for hanging, one for standing.
Things needed to complete the hanging version
3d printed:
- 1x Housing_hanging
- 1x Front_hanging
- 1x Mounting Bracket
- 1x Knob
- 1x Mounting2_hanging
- 1x Mounting3_hanging
other:
- 12x M4 Heat-Set Inserts
- 12x M4x10mm Screw
- 8x M3x15mm Screw (for the tubes left and right)
- 3x M3x8mm Screw (for the power supply)
- D20mm Aluminium tube
Things needed to complete the standing version
3d printed:
- 1x Housing
- 1x Front Plate
- 1x Knob
- 1x Mounting2
- 1x Mounting3
- 1x Strain relief
other:
- 8x M4 Heat-Set Inserts
- 8x M4x10mm Screw
- 8x M3x15mm Screw (for the tubes left and right)
- 3x M3x8mm Screw (for the power supply)
- 2x M3x12 Screw for the strain relief
- D20mm Aluminium tube
derQurps
