Prusa MK4 TPU Temp Tower 200-230

Couldn't find a print file for a mk4 with the suitable temp ranges so remixed this one to suit and hopefully the g-code is good for others to use to find the best temp for whichever tpu is being used specifically for the MK4. 

I've done this at a pretty slow 20mm/s going to do a bit of experimenting to find out what temps/speeds work with the mk4 and will update accordingly.

Update 07/12/24 - Im still learning to print with TPU the original files were from reading online and seemed to be the go to for older/other branded machines etc, slower is better is the impression im getting. Although ive started to get a little success with the standard profiles on the MK4 for printing with TPU, so i have added a Temp tower G-code using the standard profile but also stated which MVS i have used as apparantly this seems to be the tweaking point for good prints. Will keep updating as its a little trial and error and any comments from those printing successfully with TPU on the mk4 are welcome.