Minimalist door hook

I needed a simple light-duty overdoor hook and couldn't find a design I liked, so I made one. This design is quite strong for its size but keep in mind that it is only 2mm thick so it will not hold a huge amount of weight. The intended use-case is towels, hats, and lighter jackets or hoodies.

This is sized for "standard" cabinet doors, that is to say 2cm. Also scales nicely to “standard” interior doors (i.e 4cm). I'd recommend printing in provided orientation for best strength.

Print settings:

top/bottom thickness: 0.9mm or 5 layers

wall thickness: 2 walls

25% gyroid infill.

Should be ~3g @ 0.91m filament.