November 21, 2024
Description
A handle for ropes to get a more comfortable grip than pulling on the raw rope.
I used that for an improvised weight lifting pulley system.
The thin version is shown on the photo, but a thicker model is also provided for more confort.
Designed with a 6mm groove for the rope, into which the rope gets pushed, but can be scaled up/down according to what you need.
I'd recommend mostly scaling along the width and height to adjust for rope size, and along the length to adjust for hand size.
🧵 Any filament (e.g. PLA/PETG/TPU/…)
✔ Can be printed without supports. Orient with the groove towards the bottom
License:
Creative Commons — Attribution — Noncommercial
11
Quark
