3/4" Screw to Hose Pipe Flange

This is a 3/4 inch screw to hose pipe flange adapter for an Arlec 8000 BTU drainage port. This default pipe needed for water drainage is 3/4" pipe, I wanted something that would use a hose pipe (~15mm) as I had this spare.

For water tightness put a rubber or plastic washer at the end of the screw.

---

V4: Change hose flange max diameter from 14.5mm to 14mm as 14.5mm was a bit tight. Increased hose flange chamfer from 4mm to 5mm for added strength at base of flange.

Print Settings

Printer Brand:

Creality

Printer:

**Rafts:**

No

Supports:

**Resolution:**

0.2

Infill:

**Filament:** Filaprint PolyTerra PLA Orange

Category: Parts