Parametric cable clamp/clip for countersunk screws [FreeCAD]

Updates

• 2021-12-30 added V0_rounded. This version looks a bit nicer, prints with less material, but might be tricky for printers with bad bed-adhesion
  
  In addition to that you can now disable the countersink in the spreadsheet!
   
• 2021-12-29 first upload. Files: V0

Parametric cable clamp/clip

I uploaded example clamps for a single cable diameter of 3, 4, 5, 6 and 7mm and the same clamps for two cables next to each other.

If you have FreeCAD installed, it is a matter of seconds to create exactly the clip you need:

(GIFs are not working properly atm, sorry)

Is this thing useful to you?

Don't hesitate to hit the ❤ and show some love. I'm always happy to hear from you in the 🗩 comment section. If you have problems printing my files: tell me in the comment section too!

Provided files

I do like to have real CAD-files, when downloading things from others. Most users don't provide files other than .STL-files. These are useless for further manipulation or quick changes. So I'll provide the following files to you:

Is it easy to build/assemble?

No assembly required!

Is this thing finished?

Yepp!

Print Settings

Here are some general guidelines on how to print this thing.

Orientation:

Rafts: Not necessary

Supports: Not necessary

Resolution: 0.2

Infill: 25%-100%. Less infill for bigger clamps, 100% infill for smaller clamps!

Filament: PETG, ABS, ASA, …

Notes: PLA might be too brittle. Use flame retardant PETG if need be!