Detachable Cat ears for Motorcyle Helmet

The ear itself is split into two parts - inner and outer ear. 

The inner ear can be printed separately in a different color (recommended) and glued into the outer ear. 

The fully assembled ears can either be glued directly onto the helmet or you can use the detachable version of the outer ear and only glue the mount onto the helmet so the ears can be detached if not needed. 

We recommend every part to be printed on the side that will face the front when mounted to the helmet. Supports are not required.

For a full set print the following:

2x insert

2x ear_with_mount.3mf OR ear_without_mount.stl

2x mount.3mf ONLY IF DETACHABLE OUTER EAR IS USED

I recommend printing at 0.15mm layer height aswell as using PETG for everything but the insert.

Credits to Pelb (Original Author)