Angle Pads for Parallel Clamps

Print 2 sets of these pads to slide onto Bessey Parallel Clamps. Then you can use to clamp angled work pieces like tapered legs or joints that are not perfectly 90 degrees. Print the pads with no support with the pad facing the print bed. The Angle Clamp prints with supports on the build plate only. Supports come right off easily. Then Slide the 2 pieces together. It is a tight fit so you may need to flex the pad a little bit. Once together the 2 pieces will slide to any angle you need. Happy Printing!

I included 1 file with both prints and also 2 separate print files.