Armored cover for POCO F6

The measurements are the exact ones of the POCO F6 smartphone so it is necessary to increase the dimensions of X and Y in the slicer to compensate for thermal shrinkage.

I increased both X and Y by 1% but this depends on the filament used (I set 101% along X and Y in PrusaSlicer but I kept 100% along Z).

With my TPE, 101% the dimensions are acceptable but perhaps it would have been better to use 100.7%.

Obviously you need to use flexible filament such as TPE or TPU.

I had to use 8mm of brim to get it to stick to the bed.