November 23, 2024
Description
Aqara T1 sensor in a nice housing, protection against almost all weather types. Easy maintenance by unscrewing the T1 holder to replace a battery for example.
Printing, I used organic supports, overhang threshold at 30 degrees.
Used inserts are M3 x Diameter 4.6mm x Length 3.0mm. 2x M3 bolts to fasten the T1 holder in the housing.
Use 2x 3 mm screws to mount to the wall.
I should use white color, but I hoped red would go along with the bricks, that was a mistake, but it hangs in the shadows so no influence of the sun is my excuse now.
License:
Creative Commons — Attribution — Noncommercial
Ouwekaas
