Bambu Lab AMS Desiccant Containers

Here is my design for desiccant containers that fit the Bambu Lab AMS.  I started with looking at how other folks approached this issue. In the end I decided to make my own version.  This design requires zero supports and isn’t printed on a odd angle to capture all features. Instead I decided to make two shell halves that can be printed flat.  All it takes is a dot of Super Glue (Cyanoacrylate Adhesive) at each peg hole to assemble.  I also incorporated a sliding top cover/door with snap latches for easy opening/closer. This door also has a handle making easier to remove from the AMS.  I also maximized the envelope size to still fit with more volume to hold maximum desiccant. 

Like other designs I have two versions.  One with opening to accept a low cost hydrometer (see below for Amazon link). The other version without the opening to maximize how much desiccant can be loaded. One note: filament spools have to be removed from the AMS to allow access to the desiccant containers. 

https://www.amazon.com/dp/B08M3P74N3?ref=ppx_yo2ov_dt_b_fed_asin_title