Wallie(var) - Cash Module (coin tray+money clip)

This module for storing cash and coins attaches to the back of the Wallie(var) with original screws and 5 M3 nuts. 

It has dual hinges, each held together by an M3 screw (25mm or longer) and a nut. This provides increased strength compared to print in place hinges.

The lid is held shut by 12 6x2mm (same size as the ones for gridfinity) magnets, 6 on each side. These magnets have to be glued on the magnet covers first, and then the magnet cover has to be glued on the lid/frame. 

The money clip has to be glued-on in between the two small printed marks on the lid. IMPORTANT: before gluing on the clip you have to cut those marks off, otherwise the lid won't close.

All materials needed for this build: 

-7X M3 nuts

-2X M3x25mm or longer screws

-12X 6x2mm magnets

-Some form of adhesive (I used T-7000 glue for phone displays)