November 24, 2024
Description
Hi, this is my first ever contribution so don't hesitate to make a constructive comment and share your make !
“Who cares if one more light goes out, well I do”
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.20mm (careful, not 0.16 !)
The Model is 250x252.27mm in size
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA PolyLite Grey Transmission Distance: 1
PLA PolyLite White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #10 (0.92mm) swap to Blue Gray
At layer #18 (1.56mm) swap to Grey
At layer #25 (2.12mm) swap to White for the rest.
License:
Creative Commons — Attribution — Noncommercial
Vulgaax
