InWin A1 and A1 Plus Snap-on Foot Extensions

After 12 builds, the average temp savings is 5.22 Celsius

I built my first PC in an InWin A1 Plus ITX case. When I added 2 more case fans to the bottom of the case for additional cooling, I quickly realized the .5" of space left for air under the case didn't seem like enough. Gamers Nexus did some testing on this and found that to be true and pushed to look for a solution.

So to fix this, I created these snap-on foot extensions for the InWin A1 and A1 Plus ITX cases. You will now have 33mm of clearance for plenty of fresh air for cooling. I made sure that the feet match the styling of the case and add to the stance and appearance while being functional.

Additionally, I recommend moving the stick on rubber stock "feet" to the bottom of the printed extensions for additional grip.

The original extensions are 20mm tall and I have upload a lower profile 12mm version for your choice of 1.3" or 1" of air clearance.

Enjoy and post your makes!

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

.14

Infill:

15

Filament: 3D Solutech PLA Transparent

Category: Computer