Luxury Ball (Auto-Opening)

Note: The .step file for the top is behaving weird for some reason, and it won’t separate into parts properly. The .3mf file should be fine, but you can bypass this by manually inputting filament changes/cutting the body like so:

For the AMS top:

At 30.423mm switch to Gold

At 32.923mm switch to Red

At 35.923mm switch to Gold

At 37.923mm Switch to Black

For the single extruder top:

At 25.423mm switch to Gold

At 27.923mm switch to Red

At 30.923mm switch to Gold

At 32.923mm Switch to Black

This Luxury Ball was created as part of #ProjectKurt project using the Editable Poké Ball model (listed as a remix here), based off of the in-game model from Pokemon Sword and Shield. It’s part of an ongoing series of Poké Balls adapted from the main series of games, but if you want to see what custom designs others have made, you can check out both in the links below!

If you are using a multicolor printer, print the models with (AMS) in the title, but NOT the ones with (SingleExtruder) in the title. If not, do the opposite.

Check the PDF for written assembly instructions with pictures. The 3mf was made using the .step file for the project, so it has a higher resolution than the STLs themselves.

Informational video on Luxury Balls also included, as well as a video on the project, how you can make your own custom ball design, and printing/construction instruction in the long form vid below (timestamps included in the description).

Official Designs Collection: https://www.printables.com/@CarlThePumpkinMan/collections/1673950

Custom Designs Collection: https://www.printables.com/@CarlThePumpkinMan/collections/1673709

Informational Video about Luxury Balls:

About the Project/Build instructions: