Accessory to lift the Gear Box

I've used the Gear Box by Adam to shake vallejo paints using the Vallejo Paint shaker for  power drill by Kyctarnik. I needed the gearbox to be higher on the desk in order for the bottle to rotate, so I've created a stand to mount the gearbox on. As the original design has holes for bolts on the base, was easy to model this base.

Printed in the given orientation (flat base with four holes on the plate) on MK4 turns out fine. Then attach the gearbox to the base with a couple of M3 nuts and bolts (I used 16mm, but something shorter should do)