January 22, 2025
Description
it is upside down by default. please turn it around so the lip is onto the deck of your printer. WARNING i made a mistake in the Bounty designs and it is a little bit too small. you should measure it in your slicer and resize it so its OK. check the last image for the recommended resize value.
i try to provide version for Vase (spiralize) printing, full and half to accommodate various printers size. depending on your needs, using transparent or even opaque filament would look very good. you can even paint on them using water based paint and recreate wood grain!
the multiple part versions must be glued together. personally i use Cyanoacrylate glue.
pictured is version 1beta of the Harvest model. i have now made the matting surface bigger and the whole thing a bit wider so it fit correctly without forcing anything.
if you have a Aerogarden Sprout model please take a good top down picture and some measurements! if you send this information to me i will gladly make a suitable shade for yours. currently i only have the Harvest model so i cannot do more.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Miaoucat
