Swisson XMT500 Airtag Holder

I Designed a Holder to Fit an Airtag in your XMT-500 DMX Tester. So you can Track your Tester. This is especially nice if you are like me and tend to lay it somwhere during Troubleshooting :)

It is simply screwed on the Expansion Slot of your XMT. Not sure if this will collide with the Expansionboard in the Feauture. Maybe i will post an Update then.

The other Side is held together via an M3 Screw and a Heatset Insert.

Take Care, that the M3x8 Screw is Flush in the heatset and doesnt Scratch on the PCB!

Used Hardware: m2.5x8 SHCS, M3x8 BCHS and e M3 Heatset Insert.

Disclaimer: You have to open up your XMT-500 for this Mod! You can loose your Warranty doing this. Neither me or Swisson are responsible for any Issues or Damage on your XMT using this Mod!