Lidl Dishwasher tablet dispenser

Based on the great model by @ KaliM. 
 UPDATED VERSION v3 on December 1st 2024.

Changes:

• Walls are thicker (3 layers) 
• Vertical hole at the front is bigger: easier to guide tablets going in
• Hole to retrieve tablets is bigger (vertically & horizontally) to make it easier to grab a tab
• Inside bottom is sloped
• Everything remains print-in-place, no supports.
• v3: added lid, cutout in dispenser top to make it easier to remove the lid, some updates to make the shape print better without 
• v3: fixed measurements and removed the base/extend concept. Just provide the different sizes.

Tested: Lidl W5 dishwasher tablets, model: "all in one power"  with water soluble film, size: 35x25x15mm

Models: There are 4 ready-to-print models. 

Measurements: Height: 160mm, Deep: 43mm, Width: see below

Capacity, print time, filament, size with number of funnels: 
The TIME shown is without and with variable layer height (which makes it look a lot better)

Printer: Prusa Mini+, FW 6.1, inputshaper enabled, 15% infill, 0.2mm layer, 0.4mm nozzle, PLA
 

TIP: to remove the lid, in Prusa Slicer

1. Select the model
2. Right click, select Split and ‘Split to objects’
3. Now you can deselect everything and select the lid to remove it.