SV08 bed to voron adapter

needs to be ASA or ABS. this should work with Mellow 3D Official Store beds and XMSJ Stepper Motor Store / heegkqu - for voron 2.4 kit beds (seems out of stock as of 11/27/2024)

https://www.aliexpress.us/item/3256807431887740.html?spm=a2g0o.productlist.main.29.26935b21yNCQsS&algo_pvid=00444576-804e-4eb7-92b3-6debd4a71dbb&algo_exp_id=00444576-804e-4eb7-92b3-6debd4a71dbb-28&pdp_ext_f=%7B%22order%22%3A%228%22%2C%22eval%22%3A%221%22%7D&pdp_npi=4%40dis%21USD%21136.93%21136.93%21%21%21136.93%21136.93%21%402101c67a17485500420347724e9bf1%2112000041524739925%21sea%21US%214472155458%21X&curPageLogUid=W4KCGgp4aAIY&utparam-url=scene%3Asearch%7Cquery_from%3A

https://www.microcenter.com/product/659592/voron-v24-heated-bed-kit-parts-set-for-voron-24-3d-printer

https://www.amazon.com/Aluminum-Printers-Platform-Spray-Painted-Magnetic/dp/B0BBM53BLV?source=ps-sl-shoppingads-lpcontext&ref_=fplfs&smid=A8NXYSNX5OYDX&th=1

make sure to run an Axis calibration or it will not fit. I know, because i was having issues. i was 1.6 mm short on the y axis. and 0.5 on the x after printing. im guessing as this is a core xy things are backwards  i had to go down not up in my rotation_distance

rotation_distance = <model size> x <current RD> / <printed size> = <value> - <current RD>= <out put>

<current RD> -<out put> = <new RD>

example:
x=100x40/99.5=40.20-40=0.20      40-0.20= 39.8
y=100x40/99.5=40.20-40=0.20      40-0.20= 39.8
z=100x40/99.5=40.20-40=0.20      40-0.20= 39.8

x=100x39.8/99.8=39.87-39.8=0.07      39.8-0.07= 39.73
y=100x39.8/99.8=39.87-39.8=0.07     39.8-0.07= 39.73
z=100x39.8/99.8=39.87-39.8=0.07     39.8-0.07= 39.73

https://www.printables.com/model/207197-100mm-x-10mm-axis-calibration-piece

you will also need. 

• 3-4 4-5mm spacers of some kind. aluminum nylon asa/abs. if rubber(should be a little taller.

https://a.co/d/epvvNFP

• 3-4 m3 14mm screws with hex nuts. 

• you will need to make a new longer ground or mount to one of the mounting locations. 

• 100% infill if printing. snug normal supports.

• this video should cover the basis of installing a voron 2.4 bed.  use it as a example not a how to for this process.   
  
  i take no responsibility for any damage to your printer. be extremely careful and safe. 

I'm using eddy so I needed to change this. 

mesh_min: 15,20              
mesh_max: 330,335

my ASA settings. suggestions welcome in the comments.