Prusa XL Trolley + Dry Box

A trolley for my Prusa XL made out of two Ikea LACK side tables, with wheels and a dry box underneath.

Most of the printed bits are from other designers (links below), I designed a few pieces to complete the build.  Ended up printing, glueing and screwing lots of reinforcements to the Lack table to stop the thing wobbling about so much.  Re-routed the filament sensors to mount them on the PSU blanks, shortening the filament path to the dry box.

BOM:

• 2 x Ikea Lack side tables 
• 4 x Ikea Rill wheels
• 1 x random plastic box
• 4 x 300mm M8 threaded rod
• ~30 x 608ZZ Bearings
• 5lbs Silica Gel Beads
• ~5m PTFE tubing
• 5 x PTFE couplers
• 1 x Mini Round Hygrometer Thermometer
• 2 x 600mm Molex extender (female-to-female)
• 4 x 5 pin male Molex connector (to make 2x male-to-male adapters)

Printed Parts from other designers:

• 4 x Ikea Lack bottom table wheel plate
• 8 x Ikea Lack Table Reinforcement
• 4 x Ikea Lack enclosure feet reinforcement
• 10 x PTFE Wall Mount 5 Tubes
• 5 x Angled Dry Box Feeder
• Bunch of Spool Holders from Ikea Samla 45l Filament Buffering Dry Box V2
• 4 x Super fast silica gel desiccant spool container - vase mode

Bits I designed:

• 4 x Silca Gel Container Holder
• 8 x Random Plastic Box Clips
• 1 x Prusa XL PSU cover with filament sensor mount