Voron Design SMRRF Name Badge

This is a modular name badge created by @kyle_gb, @alexandertmoss, and @hartk on the Voron Design Discord! It is designed to be modular, and allow you to customize it, as well as has a slot for a maker chip to be shown off. 

There are two different versions of the Name Plate. The MMU one is designed to be printed on multimaterial capable printers, while the Layer Swap version is intended to be printed with you manually swapping filament at a certain layer to handle the color change. 

The name plates are retained in the badge with short sections of 1.75mm filament. 

-----
These are the recommended print settings: 

Material: Doesn't matter 
Layer height: 0.2mm 
Extrusion width: 0.4mm 
Infill percentage: Doesn't matter 
Infill type: grid, gyroid, honeycomb, triangle, or cubic 
Wall count: 4 
Solid top/bottom layers: 5 
-----

K2_Kevin Maker Chip