Yaesu Handset / Microphone Hanger for Woodscrews

I have a couple Yaesu radios, which use an MH-31 and MH-48 mic. The original hanger is cheap and thin sheet metal, which easily bends, so I created this holder.

I believe I made this for #8 wood screws, due to naming the model the way I did.

• Remember to drill a hole first so you don't split the wood!
• Do NOT over-tighten, or you may split the sides of the mount.

Print this laying on its' face, as that will ensure the best strength as well as surface finish. This can be mounted vertically or horizontally; just not upside down or backwards.