January 20, 2025
Description
lowers the probe to the recommend z-hight for the stock nozzle.
no supports should be needed. print in asa/abs
us m3 screws.
offsets should be close to:
z_offset: 2.5
x_offset: -18
y_offset: 16
recalibrate
G28 X Y
G0 X175 Y175 Z15 F6000
LDC_CALIBRATE_DRIVE_CURRENT CHIP=btt_eddy
SAVE_CONFIG
SET_HEATER_TEMPERATURE HEATER=extruder TARGET=230
SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET=65
G28
BED_MESH_CLEAR
G0 X175 Y175 Z3 F6000
PROBE_EDDY_CURRENT_CALIBRATE CHIP=btt_eddy
SAVE_CONFIG
License:
Creative Commons — Attribution
7
Valerie Moore
