Remix of Extra Spool Holder for Prusa Enclosure - Extended Length

This is a remix of the Extra Spool Holder for Prusa Enclosure - Extended Length from @KevinBarker.

The longer spool arm is a great improvement for MMU3 users (having all spools within the enclosure) because of the easier access. There is one slight design flaw, the bayonet fitting closes in the wrong direction (clockwise).

Therefore i changed the rotation direction of the bayonet fitting, so the spool arm cannot come loose due to the spool movement if the arm fits not tight enough.

I have also added an arm for the Left Bottom Side of the Enclosure.

Distance from spool center to the enclosure window is 105mm.

printing instructions:

PETG, 0.20mm speed, 0.4 nozzle, no supports, 15% gyroid infill

Information for users who are going to mount all 5 spools within the enclosure:

Spool 1 right bottom front, use SpoolHolder-RB, connect arm counter-clockwise 

Spool 2 right top front, use Original Spool Holder, connect arm counter-clockwise

Spool 3 left top front, use Left Version of Spool Holder,  connect arm clockwise

Spool 4 left bottom front, use SpoolHolder-LB, connect arm clockwise

Spool 5 left top back, use Original Spool Holder, connect arm counter-clockwise

Link to more information for using 5 Spools within the original enclosure