Raspberry Pi 3 Wall Mount Case

Wall mountable case for the Raspberry Pi 3(B/B+). I wanted something I could mount in my enclosures and have power soldered directly to the GPIO pins.

Update: 05/09/22

• Added v2 to the case models to increase the spacing of the MicroSD card slot.

Parts:
3 x M3 Nuts
3 x M3 8mm Bolts (Lid)
4 x M3 6mm Bolts (Case)
1 x 2.1 MM 5A DC Power Jack Socket Threaded Female Mount Connector (https://amzn.to/2FXTKHy) - Optional with Case choice.

Models:

Case with Power Option in the rear of the case.
1 x 1-RPi3_Case_v2.stl
1 x 1-RPi3_Case_Lid_v1.stl

Case with power option in the front of the case.
1 x 2-RPi3_Case_PowerFront_v2.stl
1 x 2-RPi3_Case_PowerFront_Lid_v1.stl

A smaller version of the case, no power option.
1 x 3-RPi3_Case_Small_v2.stl
1 x 3-RPi3_Case_Small_Lid_v1.stl

Print instructions

Rafts: No

Supports: No

Resolution: 0.2

Infill: 20

Filament: Inland PLA Orange/Yellow
Notes:

Print Settings:
Prusa Slic3r - Generic PLA

Post-Printing

1. Insert the RPi into the case at an angle to align
2. DC Power Jack Socket & tighten into the case.
   •  
3. Use M3 6mm bolts to secure RPi to the case.
4. Solder DC Jack wires to the correct GPIO pins for power.
5. Insert M3 nuts in the case lid, and press to fit. (Optional: Add a drop of super glue to secure)
6. Install the case lid and insert the 8mm bolts/screws