drain clean adapter for Takagi water hose

If you have a Takagi water hose reel (see the last picture) and want to spray into, for example, a bathtub drain or the overflow of your sink to clean it, water will tend to spray around. This model acts as a "spray shield" that protects you and the surrounding area from getting wet.

No special print instructions, print as you prefer.

Usage

1. Set the water nozzle to the “hardest” water jet position.
2. Place the spray shield over the nozzle. If the fit is not tight enough, use duct tape as shown in my picture.
3. Position the nozzle/spray shield over the drain and activate the water.

see also my other Takagi accessories:

• https://www.printables.com/model/625342-takagi-water-hose-reel-drip-bucket

Additional notes

I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to show others and me how well it goes.
If you post a make, let me know which filament you use.

If you want to support me by donating a coffee go to https://ko-fi.com/antimaterie I would really happy about it. The money will be invested in all stuff regarding 3d printing to give more and better quality models.

In general my Prints are not for commercial use, but if you are a print farm owner and want to sell some of my stuff, please contact me.

Hope you enjoy my models.