Box for Digital Voltage meters (KWS-2303C & KWS-MX18L)

Hi

As I could not find any box that would fit my needs I had to do it my self :-)

I printed PETG but you can do PLA or anything that makes sense to you.

Top lid has bigger cutouts in order to easily open Lid in certain “angle” without touching meters them self.

I used 4x 5x2mm magnets to hold the lids together. I wasn't sure if two would be sufficient, but after two months of carrying them in my bag, I haven't encountered any issues.
You can use glue to secure magnes in place but based on your calibration of a printer, it might just be snug fit and no glue will be needed.

There is one extra slot as per photo which is there in case you want to store cover for USB-C (KWS-2303C) so you do not lose it.

Top Lid 

• Dimensions: 54.9 mm × 74.2 mm × 6 mm
• Volume: 10,704 mm³
• Number of Faces (triangles): 1,336
• Number of Vertices: 670

Bottom Lid 

• Dimensions: 54.9 mm × 74.2 mm × 9 mm
• Volume: 20,055 mm³
• Number of Faces (triangles): 1,320
• Number of Vertices: 662

Both combined

• Dimensions: 54.9 mm × 74.2 mm × 15 mm
• Volume: 30,759 mm³
• Number of Faces (triangles): 2,656
• Number of Vertices: 1,332

KWS-MX18L

https://www.aliexpress.com/item/1005007054185922.html?spm=a2g0o.order_list.order_list_main.55.3e3318029Oq6uv

KWS-2303C

https://www.aliexpress.com/item/1005006175491959.html?spm=a2g0o.order_list.order_list_main.60.3e3318029Oq6uv