Portrait - Pokémon Squirtle Water Pool HueForge

Thank you for downloading my works. If you would like to sell my designs, past and future, a commercial license can be obtained from my MakerWorld or Patreon page.

Pictures shown are printed in an 0.4mm Nozzle
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Cobalt Blue (Bambu Blue, or any darker blue)Transmission Distance: 3.9
PLA Elegoo Sky Blue (light/baby blue)Transmission Distance: 3.8
PLA Default White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer (0.72mm) swap to Cobalt Blue(Bambu Blue or any darker blue)
At layer (0.96mm) swap to Sky Blue (Light/Baby blue)
At layer (1.36mm) swap to White for the rest.

Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with Hueforge, just use a lighter to whisk them away.  

More prints: Bookmarks -- Portraits -- Coasters -- Clocks -- Puzzles -- Display Stands -- Display Frames

They are sorted and can be found in my Collections - https://makerworld.com/en/@3djd/collections