jigsaw blade case

This case has 6 slots for jigsaw blades and comes in 3 sizes (80, 100 and 120mm total length).
Every slot can take 2 blades (makes 12 blades in total per box).

If you put the blades the t-shaft first in the slot, then you are able to read the blade type printed on the blade (see photo) 

Size of the whole case are optimized to fit in my metabo jigsaw case (see photo) - 4 blade cases fit in there. This makes 48 maximum blades in total!

Main part and lid are print in place, so a bit accuracy is needed here. Please check in slicer for clearance before you print. First opening of the lid should be done with a bit care.

If you want to print it lid and body separately  I've added body and lid as parts. Print the lid standing, so layer lines are not in the same orientation as the force. Depending on your bed adheasion some brim (or brim ears) could be helpful.

Print instructions:

• 0.15 layer height
• 10% honycomb infill
• 3 bottom, 5 top layer

I printed it in Polymaker polyTerra forest green and sunrise orange on my modded prusa mini.

Modeling is done in FreeCAD.

If you need other sizes, please let me know through the comments….

update 1.1.2022: the little studs that should hold the lid where to small. Now the are a bit bigger. 

update 4.1.2022: uploaded wrong 75mm version. now it latest model is uploaded

update 6.1.2022: add 120 mm version and update photos

update 17.5.2022: add ‘print in parts’ if your printer has not the needed print in place clearence

See also my other workshop stuff: https://www.printables.com/@Antimaterie/collections/1000059

additional notes

I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to show others and me how well it goes.
If you post a make, let me know which filament you use.

If you want to support me by donating a coffee go to https://ko-fi.com/antimaterie I would really happy about it. The money will be invested in all stuff regarding 3d printing to give more and better quality models.

In general my Prints are not for commercial use, but if you are a print farm owner and want to sell some of my stuff, please contact me.

Hope you enjoy my models.