Moza R5 inclination wheel base adapter for Next Level Racing GT Track Rig

When installed on this adapter, the base will be angled at 7 degrees from the cockpit mounting plate.

To lock the base in front, you will need M6x18 screws (I had them with washers), and M6x10 screws for the back (included with the base). To attach the adapter to the cockpit with a lock, required four M4x20 screws (preferably with washers as well) and four M4 nuts are required.

The model is designed for printing without supports, an additional 0.2 mm layer is used in the nut holes. Print on the platform, with the top side facing the wheelbase. Infill gyroid 20%, material PETG