Bookmark - Veteran Salute HueForge

Thank you for downloading my works. If you would like to sell my designs, past and future, a commercial license can be obtained from my MakerWorld or Patreon page.

Veterans Day is coming. My Wife wants to make a tribute to those who served. She is more observant of this day, unlike some of us(including myself) who takes this day for granted. My brother-in-laws were service members and one has been affected physically for his service…the oft-forgotten price some veterans pay for our freedom.  This is a Thank You and Salute to those two and all who served.

Pictures shown are printed in an 0.4mm Nozzle
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Can be printed in 5 or 4 Colors. The one pictured added one layer of a blue-gray to give it a little more dimension. Truthfully, it doesn't make much of a difference. I just like the little touches. My pet peeve.

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.4
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions: 5 Colors
Start with Black
At layer #7 (0.64mm) swap to Blue
At layer #10 (0.88mm) swap to Blue Gray
At layer #11 (0.96mm) swap to Red
At layer #13 (1.12mm) swap to Jade White for the rest.

Swap Instructions: 4 Colors
Start with Black
At layer #7 (0.64mm) swap to Blue
At layer #11 (0.96mm) swap to Red
At layer #13 (1.12mm) swap to Jade White for the rest.

This is a five color HueForge. Use this tutorial by Cloudy Nostalgia to print more than 4 colors on 1 AMS.

Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with Hueforge, just use a lighter to whisk them away.  

More prints: Bookmarks -- Portraits -- Coasters -- Clocks -- Puzzles -- Display Stands -- Display Frames

They are sorted and can be found in my Collections - https://makerworld.com/en/@3djd/collections