About
Gridfinity holder for 3DJAKE Nozzle changer kit (CB-DW5B) - just the top, which can be pushed in into any 1x1xY box - I took 1x1x3 pmcquay bin as a base in it.
Please give a like and post makes and provide comments for further improvements.
Changelog
- 2024.12.05 initial release
Dimensions:
- width: 42mm (gridfinity)
- depth: 42mm (gridfinity)
- magnets 6x2mm, optional
Print:
- notice gcode contains moves for my custom timelapse video capture (print head moves to back and then to Z axis), so provided gcode file is just for rough estimation of the print time + required filament,
- I suggest 0.2mm layer height
- infill whatever you like but 20% is recommended
- no supports, no brim
- print the top with round elements pointing up
- wait till the print is cool and be careful when removing it from the plate, unfortunately it is possible to rip tiny plastic fragments in the process.
Assembly
- print the top, print the bottom box of the size you want (1x1x3 at least AFAIR)
- bottom - use hot air gun to squeeze a bit two opposite edges of the bin (look carefully at the photos how I did it)
- top - optionally use hot air to adjust the thin bendable parts so it grips your bits as hard as you like, so for example they do not fall out on their own.
- push the top into the bin box
- optionally glue in magnets to the bottom of the box
_KaszpiR_
