folding rule holder

Folding rule holder

It holds the folding rule at an 4° angle, which makes it sit steady.

The holder is 36 x 18mm (1-7/16 x 11/16"), which should fit most of the rule's out there.

I've tried it with the closest 3 rulers at hand, and it worked. 

Print “laying down” with 20% gyroid/grid infill and organic support from build plate only.

The tool holder module couples with the attachment plate module, print one toolholder and one attachment plate for this setup.

MODULA - a module based tool holder system

This module attaches to the adapater biltema  or the vanilla adapter available here on Printables. The vanilla adapter can be modified so it fits wherever You need to hang these modules.

A universal adapter for (metric) PEG boards, this one fits Biltema, Jula, Clas Ohlson, CC 12mm (15/32 inch) spacing of the 4mm (5/32 inch) diameter screw holes.

The idea is a adapter plate (metric/imperial/plain) that attaches to a module, the module snaps on to this adapter with dovetails.

Why use an adapter? Everyone can share the modules worldwide, and just adjust the adapter plate for their needs.