Realistic ribbon Christmas tree

This is a mashup between DrJones's design "christmas tree" and my design "Ribbon Christmas tree".

While the original model weighed only 20g this one weighs about 80g; 
the spring and the star are compatible between the two models.

I recommend printing all the pieces without supports (the STL files already contain the correct positioning of the pieces to avoid supports).

STAR VARIANTS

INSTRUCTIONS 🧰

MY SETTINGS

Nozzle : 0,4 mm
Layer height: 0,2 mm
walls: 3
top/bottom solid layer: 6
infill type: rectilinear
infill density: 15%(tree), 20%(the rest)
NO supports
NO vase mode

ASSEMBLY

1. Stretch the spring a bit so that you can work with it better;
   
2. insert the lower end of the spring into the first hole at the base of the tree, as shown in the photo;
   
3. insert the lower end of the spring into the second hole at the base of the tree;
   
4. insert the tip of the tree into the hole at the top of the spring;
   
5. place the star on top of the spring;
6. enjoy! 🎄