Ikea Skadis Spool Holder

After adding Skadis pegboards to my setup I wanted a way to mount my filament on those boards when using that filament for printing. Due to the limited size of my print bed (120 x 120 x 120mm) the best option was to create a custom design.

This Skadis spool holder design can be printed diagonally on the 120mm printbed, only using support for the pegs. To hold the spool I recommend using a 12mm thick plastic rod (in my case, some left over garden stake / plant support). 
The length should at least be 100mm, but if you use bigger rols of filament, a longer size might be needed.

The STL is already oriented for smaller 120 mm print beds, so if you have a smaler printer, you can print this design right away!

Printed on the Da Vinci Nano using stock settings with support on the pegs, using Polymaker PLA.