Rear Display Protector for 12V PARKSIDE Performance cordless screwdriver

When we bought our 12V PARKSIDE Performance screwdrivers in LIMITED Bauforum24 Edition from LIDL we wanted to protect the nice and unique color display on the backside from any dust and scratches.

So we developed this rear protector which can easily be stuck on. No glueing or screwing neccessary. It clicks into a little notch on the rear and you are ready to go that simple.

The SLOPED version of this protector offers a further advantage: You can lay the crewdriver backwards onto the ground (as shown on the pics) and use it as stational grinder for example in addition to its power lock to continue to operate without users hand. The slope of the protector guaranties that the batteries rear is in one exact line with the protector to give you the most secure hold possible.

The SLOPED version WITH BASE offers even more stability against knock over as well as holders for 14x hex bits and 4 drill bits with 3mm shaft.

The design leaves enough space to reach the 4 display buttons and do your settings.

Enjoy!

Material: PETG (recommended)
Layerheight: 0.2mm or better
Infill: 50%