Drybox Tray bee remix

Tray from SteveS fitted nice but wanted to save filaments…

link to his prints: https://www.prusaprinters.org/fr/social/84834-steves/about

From Original thread:

Simple tray to sit the Drybox in on top of your Lack Enclosure or whatever.

Saves screwing the dry box down to stop it being dragged around. Stick these down with double side tape, sit the box in the tray, job done. Simple.

Updated the tray as it was to shallow to hold the boxes properly on the lid when it was lifted. Utilizing a clamp design over the dry boxes and these deeper trays you can lift the lid to service the MMU without unloading everything

And his print instructions ( i added my 3mf)

Print with whatever settings you choose for the material being used. I ended up using a 0.6mm nozzle as i installed it to print the Dry boxes (cut print time in half!)