ESRack - Module - HP EliteDesk G3

I've printed a bunch of stuff part of the ESRack system for my home rack but I didn't like the HP Elitedesk module by @EvilProphet, so I resized and combined the one created by @Spekkie3D and added ESRack side brackets. This retains all the features from Spekkie3D just allow it to work with the ESRack system.

This fits my HP Elitedesk G3 800 perfectly, but I'm not sure if other models are any different, YMMV. Refer to the original models for printing and assembly instructions.

This is a normal ESRack module size, so print the required brackets/modules you need.
https://www.printables.com/@EvilProphet/collections/1297380

------------------------------
The ESRack system includes components:

• Mounting Brackets - used to install unit in the rack, avilable in 3 sizes:
• Short
• Medium
• Long
• Device Modules - each module can handle a single device

Possible Configurations:
- [Mounting Bracket Short] + [Module] + [Module] + [Mounting Bracket Short]
- [Mounting Bracket Medium] + [Module] + [Mounting Bracket Medium]
- [Mounting Bracket Short] + [Module] + [Mounting Bracket Long]
- [Mounting Bracket Long] + [Module] + [Mounting Bracket Short]
- [Mounting Bracket Long] + [Mounting Bracket Long] (Blank Front Plate)
------------------------------

Note:
In my picture of my rack, I don't have the computer fully pushed forward. I printed in ASA and didn't factor in shrinkage so its a really tight fit to push the computer fully flush but thats fine because now its harder to access the power button which helps prevent accidental shutdowns if I'm in the rack doing something.