Print In Place & Parametric Wristband for your projects

Print In Place & Parametric Wristband for your projects

by Earthworm Jon

Use this design to create and make a print in place wristband to fit your project and wrist!

Basic Instructions

1. Open the designs in Fusion 360.
2. Change the width of the wristband or the number of links by going to “Modify” and then “Change parameters”.
3. Export as STL, slice and print!
4. Attach each part of the wristband to your existing model by using a short piece of 1.75mm filament as a pin.

Please note there are some problems with the tolerance parameter at the moment but leaving it at the default 0.5mm should work for you.

Design Guidelines

For the wristband to work with your designs, see the diagram. For the filament pinhole, use a 2.10mm hole or so.