Big floor standing sign

It is a big standing sign:

about 12 cm high, the table area is 110mm x 70mm.

The two parts are held together with magnets, there are no hidden hinges which could break.

You have to print one Side_A and one Side_B part.

Default config is one ‘Do not use’ side and one with a rim to put a paper sign into it

I printed it with 0.12mm layers 5 walls.
It can be printed totally flat, the text is higher as the other parts ,so you can easily make a color change.

The magnets( 8mm diameter, 3mm thick) had to be glued at an angle, and of course with the correct polarity.
See it on the second and third photo (the red circles symbolizing the magnets).

They will not be perfectly symmetrical, but luckily they attract each other :)

At the top for the hinge use a solid wire (max 1mm diameter) or a staightened paperclip.
On the sides of the hinge there are two small cutouts so you can bend it in.

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

CAREFUL with the cable cutting, small clipped metal parts can always fly in the wrong direction. Use some eye protection, or at least look away and cut it as far from your face and eyes as far it is possible!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

 


If you'd like to customize it use the models with ‘empty’ in their name.