Faketec nrf52 Meshtastic Case with Encoder/Buzzer/GPS/Environment sensor, M5Stack CardKB Keyboard-ready

09.02.2026 Update:

• add new Front part with new necenano support, which uses low-profile USB-C connector. 

18.02.2024 Update:

• add Base.stl file and upgraded step file

In relation to the original model:
- the profile of the adjoining surface has been changed. A side has been added, which makes the model more rigid.
- the hole for the antenna has been changed, now the mounting hole for the nut is on the inside
- the position of the buttons has been changed, since the faketec pcb has the buttons swapped
- the method of fixing the pcb has been changed from a latch to a screw (M2)
- the position of the display has been changed
- a partition has been added for the cardkb connector, which can be broken off if necessary
- the hole for the usb-c connector has been changed to a tighter one

Connection:

Supported OLED display: with pcb size 26x26 mm. 

PCB gerbers: https://github.com/gargomoma/fakeTec_pcb

Tested with the board version 2. Should be compatible with version 3