Burgle Bros 3D Tower (Remix)

For the pillars you need 4x of each of these parts:

• burgle-bros_pillar_cap
• burgle-bros_pillar-top
• burgle-bros_pillar_middle
• burgle-bros_pillar-pin
• burgle-bros_pillar-bottom
• burgle-bros_pillar_base

Pillars are constructed as follows:

For all three stages you need to print (these are unchange from the original):

• 6x burgle-bros_tray
• 3x burgle-bros_xframe

Then everything is assembled like in the original tower.