January 1, 2022
Description
... my Bowden setup struggled with the snap on buttons on the original design.
=> I redesigned it fully flat with hooks.
Two sizes: for standard 17cm masks as well as 14cm "kid size" masks.
As always: use responsibly at your own risk!
Check on this for additional comfort - at least as long as you are wearing glasses along with your mask:
https://www.thingiverse.com/thing:4599585
Printer Brand:
Anet
Printer:
A8
No
Supports:
No
0.24
Infill:
0%
Notes:
Geometry designed for following print settings:
Three "shell" outlines with 0.4mm nozzle.
First layer 0.28, second and third layer 0.24
... For minimal print times!
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
Jori
