December 9, 2024
Description
A simple rail to hide some cables
can be used as a clip or as a full rail.
Print on its side,
Add mouse ear brim
Adjust in slicer to your height needs in slicer either scaling or with negative part modifier
Printed with TPU 80A
Layer height: 0.2
Line width: 0.5
Nozzle 0.4
Walls: 4
Infill: 15%
Pattern: gyroid
Although easily can be printed with PLA or PETG on any nozzle/settings
For TPU walls,infill/pattern settings will impact on hardness of the end detail
No supports needed
After print: stick with double-side duct tape
License:
Creative Commons — Public Domain
Maksym Dudkin
