January 1, 2022
Description
I mounted a bag to the porter of my bycicle - which completely covered the LED Backlight which is designed to be mounted on the seat post.
This adapter creates an "alternative seat post" which is screwed to the back of the porter with two M5 screws.
The angle of this alternative post is 20°, which attaches the Backlight in parallel to the ground.
This can be printed upside down without support. I used a brim due to hight / bottom surface ratio - but would probably also work without brim.
Printer Brand:
Anet
Printer:
A8
No
Supports:
No
0.2
Infill:
20
Notes:
I used a 3mm brim - would probably work without, just wanted to be sure...
License:
Creative Commons — Attribution — Noncommercial
11
Jori
