April 30, 2026
Description
The GEN2 Series is the next evolution in the most versatile 3D printed drawer system, the GEN2 Modular Storage System. You can now easily swap drawers around thangs to the fully 3d printable QuickLock mechanism design
Wait What is the GEN2 System? Watch this short video and prepare for storage awesomeness!
What you need?
These drawers are completely compatible and interchangeable with any GEN2 drawer systems in STANDARD length. Here are my recommended links to get started:
• GEN2 Modular Drawers - Standard - Here you will find everything you need for installing the drawers under tables, such as the rails, drawers cases, and my favorite… QuickLocks!
• GEN2 Table Top Kit - Standard - Alternatively this kit will allow you to place your drawers on top of any table surface.
To customize these drawer here are my recommended links to get started, you can also fin more at jerrari3d.com
HARDWARE
Includes affiliated links to help support my projects
• Filament - Black PETG (My go to for the drawer bodies)
• Screwdriver
• Countersunk woodscrews: (Metric: 4x25mm to 4x16mm) or (SAE: #6 or #8 up to 1" long)
• Drill bit that is smaller diameter than the wood screws
• Pen, Marker, or Scratch Awl (for installing under tables)
• Magnets (Optional): 10x5x2mm or 10x2mm
• M3 nuts and screws: M3x6 - M3x10- I prefer this kit
• Magnets for Gridfinity (6x2mm) - I prefer these in 300 count
• Magnetic Insertion Tool V2 (Optional)
For basic instruction on assembly please check out the above video
Detailed visual instructions at Jerrari3d.com
___________________________
Gridfinity designed by Zack Freedman
Magnetic Gridfinity developed using Actually Parametric Gridfinity – Base Grid + Bins by pcnc
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
Jerrari
