December 15, 2024
Description
This vent design adds a curved lip to let the lower electronics chamber vent out convection heat through the exhaust port while also giving the heated chamber fan a wide path to vent out toasty air. All while keeping the two from mixing.
No screws or any other hardware is needed for this fix. The height of the part is enough to hold it snuggly in place against the back panel after all is reinstalled and screwed in.
Please print this in the highest temp filament you have. ABS/ASA as a minimum!
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
CoordSpace
