Minimalist Reindeer, Seasonal Christmas Decoration

A minimalist yet cute reindeer ornament, which is inspired by the class Band Saw Reindeer by Nick Engler. 

Because I didn't have a band saw, I designed a 3D printable version similar to the original, but with some slight adjustments for better printability. 

Please note: the body of the reindeer should be supported. 

Happy printing!

Size: 5,3 x 2,9 x 10 cm (can be scaled to your liking)
Layer height: 0.2 mm 
Perimeters: 2-3
Infill: 10%
Print time: 2,5 hours 
Print speed: 30mm/s (slow but steady)
Bed adhesion: I recommend using adhesive, otherwise a brim, for better bed adhesion. None could work, but it is a bit tricky. 
Supports: Yes (touching buildplate)
Top contact Z-distance supports: 0.25 - 0.35mm 
Orientation: upright (standing on its legs)