Festool MFT 3 Side Bracket/ Clamp

Heyho.

I stumbled upon this Festool Design contest and came up with this holder.

You can slide it on the side of the MFT and use it to hold wood/ oter long things at the side of the table. Also you can kinda clamp it down and keep it in place with a wedge to drill some holes, glue stuff up or manipulate it in annother way.

Since I don't have the MFT3 (yet) I was not able to test it. So if you are the first one to print this design please comment and share if everything works as intended!

Ofc. I testprinted all parts and drytested them.

M8 System 

U don't like the wedge system? No Problem. Go for the M8 System ,-)

In addition to the printed parts you will need a M8 Screw (≥38 mm), Nut and a Knob.

https://www.printables.com/model/86250-star-knob-machine-handle-m10-m8

Printing Instructions: 

Use some stiff and tough material! I would recommend sth. like PETG-CF, PA-CF, etc. But in my tests PLA performed well too :)

You want the printed parts to be quite strong. So go with >30% Infill and >5 Perimeter.



Have fun!


Also you can check out some other Festool designs by me:

https://www.printables.com/@MeisterEdel/collections/128636